AW: [ocpp] OASIS OCPP: Use Cases for show message on Charge Point wanted

From
<>
Date
2016-11-10T11:47:33+00:00
ID
Thread
AW: [ocpp] OASIS OCPP: Use Cases for show message on Charge Point wanted
Hi Robert,

 

a display cycle (of one state, each state has its own cycle and frames) starts with the State_y_Frame 1 for x1 seconds then State_y_Frame 2 for x2 seconds and so
 on until the last frame is displayed. Finally the cycle starts from the beginning displaying the State_y_Frame 1. If the state changes, the cycle is interrupted and a new one is started (corresponding to the new state).  So you will have to “inject” ore overlap
 one of the “cycle” frames.

 

 

>>> Do you mean that with 1 message can contain all of these in one message so the same message can be send to different Charge Points? Or that the message has to be able to support different types
 of display: multi line, single line, B&W and Color? 

Is Color a SHOULD or a nice to have?

 

This is one of the option where the rendering is done at the CP. Alternatively the CS can prepare the correct frame and send it to the CP .

 

For the Color element  there are two aspects:

-       
One is the text color on a color display

-       
There are several CP that have additionally a visual interface (RGB LEDs) that can be also controlled by such a message.

 

Generally this are options. At the end, only the CP will decide what to do with this information: display, print, change color or just ignore.

 

 

 

Mit freundlichen Grüßen / Kind regards

i. A. Dr.-Ing. Sergiu Tcaciuc

Seniormanager

Softwareentwicklung

eMobility

Tel.   +49 (0) 27 23 / 41-6 47

Fax   +49 (0) 27 23 / 41-49 6 47



www.MENNEKES.de

 

MENNEKES Elektrotechnik

GmbH & Co. KG 

eMobility

Aloys-Mennekes-Straße 1

D-57399 Kirchhundem / Germany

 

AG Siegen HR A 6577 Komplementärin / Unlimited Partner:

AMAD Mennekes Holding Verwaltungs-GmbH Siegen HR B 5975

Geschäftsführer / Managing Directors: Walter Mennekes, Christopher Mennekes,

Michael Büenfeld, Christoph Epe, Volker Lazzaro

stellv. Geschäftsführer / Deputy Managing Directors: Jürgen Bechtel, Dietmar Spurk

Zur Einladung...

Werden Sie Teil eines starken Teams und erleben Sie wie

spannend die Arbeit in einem internationalen Unternehmen ist! 

Jetzt ONLINE bewerben:

www.MENNEKES.de/Stellenmarkt 

Von:  [mailto:]
Im Auftrag von Robert de Leeuw

Gesendet: Dienstag, 8. November 2016 10:27

An: 

Betreff: Re: [ocpp] OASIS OCPP: Use Cases for show message on Charge Point wanted

 

Hi Sergiu,

 

Great input!

 

What do you mean with "cycle"?

 

 

"2.      The
 message should support different screen levels (Single line  B&W, multiline B&W, multiline Color etc. )"

Do you mean that with 1 message can contain all of these in one message so the same message can be send to different Charge Points? Or that the message has to be able to support different types
 of display: multi line, single line, B&W and Color? 

Is Color a SHOULD or a nice to have?

 

"3. The message should support graphic elements  (from your example a Santa Claus picture)"

Is this a SHOULD or a nice to have?

 

 

 

Kind regards,

Robert de Leeuw

IHomer

Hoge Ham 85

5104 JC Dongen

 

John F. Kennedylaan 3

5555 XC Valkenswaard

T: +31 6 2857 2123

E: 

I: http://www.ihomer.nl/

 

2016-11-08 9:41 GMT+01:00 <>:

Hello Robert,

 

We had a similar subject for some time (we did not got a solution).

 

The following requirements for a custom message was relevant:

 

1.     
The message should fit into one sub-screen (a list of sub-screens displayed during one state in a cycle. The cycle relates as long as the state persist)

2.     
The message should support different screen levels (Single line  B&W, multiline B&W, multiline Color etc. )

3.     
The message should support graphic elements  (from your example a Santa Claus picture)

4.     
The message should support simple multiline formatting elements (like CSS: Size, Font, Color etc.)

5.     
The message should support different languages (Unicode?)

6.     
The message should include the minimum display time in a cycle

7.     
The message can include the overlay priority (display on top of all screens or between the screens at the cycle end)

8.     
The message can include the maximum display time in a cycle

9.     
The message can include a validity period or number of cycles

10.  
The message can include the charging point state when is should be displayed (ex. only in idle)

 

 

As examples i would add:

-       
Display bonus information

-       
Display personalized greetings

 

 

Hope this can be helpful for you.

 

Mit freundlichen Grüßen / Kind regards

i. A. Dr.-Ing.
Sergiu Tcaciuc

Seniormanager

Softwareentwicklung

eMobility

Tel.   +49 (0) 27 23 / 41-6 47

Fax   +49 (0) 27 23 / 41-49 6 47



www.MENNEKES.de

 

MENNEKES Elektrotechnik

GmbH & Co. KG 

eMobility

Aloys-Mennekes-Straße 1

D-57399 Kirchhundem / Germany

 

AG Siegen HR A 6577 Komplementärin / Unlimited Partner:

AMAD Mennekes Holding Verwaltungs-GmbH Siegen HR B 5975

Geschäftsführer / Managing Directors: Walter Mennekes, Christopher Mennekes,

Michael Büenfeld, Christoph Epe, Volker Lazzaro

stellv. Geschäftsführer / Deputy Managing Directors: Jürgen Bechtel, Dietmar Spurk

Zur
 Einladung...

Werden Sie Teil eines starken Teams und erleben Sie wie

spannend die Arbeit in einem internationalen Unternehmen ist! 

Jetzt ONLINE bewerben:

www.MENNEKES.de/Stellenmarkt 

Von:
 [mailto:]
Im Auftrag von Robert de Leeuw

Gesendet: Montag, 7. November 2016 17:13

An: 

Betreff: [ocpp] OASIS OCPP: Use Cases for show message on Charge Point wanted

 

Hi All.

 

There was an idea for a CR about sending a message/text to a Charge Point that should be displayed on the Charge Point if it has a display.

Are there companies in this TC with use cases for this? Requirements?

 

Can you please provide these? 

Kind regards,

Robert de Leeuw

IHomer

Hoge Ham 85

5104 JC Dongen

 

John F. Kennedylaan 3

5555 XC Valkenswaard

T: +31 6 2857 2123

E: 

I: http://www.ihomer.nl/